How Do Reflective Road Studs Improve Motorway Safety?

15/11/2024
Read: 39
Motorways are a type of road designed specifically for high-speed driving. With the advantages of high efficiency, safety, and energy saving, they have significantly improved the quality of transportation and provided an important basic guarantee for social and economic development. One of the purposes of traffic infrastructure on motorways is to ensure driving safety, and reflective pavement studs are no exception. Reflective road studs on motorways are mainly used to improve driving safety and guide the direction of vehicle travel. Next, let’s discuss the specific functions of installing reflective road studs on motorways.
highway reflective studs

highway reflective studs

Features of reflective road studs on motorways

1. High reflection

The surface of reflective road studs uses high-brightness reflective materials (such as glass beads or reflective films), which can reflect bright light under the illumination of vehicle lights so that drivers can see road markings even at night or in environments with poor visibility. The reflection effect is usually bidirectional or multi-directional, ensuring that the reflective effect of the road studs can be seen from the perspective of vehicles at different angles.

2. Strong and durable

Reflective road markers are usually made of cast aluminum, tempered glass, or plastic and can withstand frequent vehicle rolling. Reflective pavement studs have good weather resistance and can adapt to harsh weather conditions such as high temperature, low temperature, rain, and snow, ensuring normal use in different environments.

3. Role at night and in bad weather

Reflective road studs provide visual guidance at night or in rainy and foggy weather conditions to help drivers accurately determine the lane position, which is particularly important on roads without street lights.

4. Installation location

On motorways, reflective road markers are generally installed in key locations such as road dividers, bends, tunnel entrances, and exits to provide clearer road information.

motorway reflective studs

Why install reflective road studs on motorways?

1. Improve night driving safety

There are generally no street lights installed on motorways, so when driving at night, the driver’s vision is limited. Reflective road studs have a strong reflective effect, allowing drivers to see the boundaries and directions of the lanes under the illumination of car lights, reducing traffic accidents caused by unclear vision.

2. Provide road guidance in bad weather

Reflective road studs installed on motorways can remind drivers through strong reflections under low visibility conditions, guiding them to stay in the correct lane. Reflective road studs are easier to be illuminated by car lights than traditional road markings and have better visibility.

3. Warning of danger

Road stud reflectors can mark the edges of curves and roads through their bright reflective effects, enhance warning effects, and avoid deviating from lanes while driving and causing traffic accidents.

4. Separate lanes and driving directions

At the forks or forks on the motorway, reflective pavement studs can also guide vehicles to correctly enter the target lane to avoid confusion caused by unclear driving directions.
reflective road stud

reflective road stud

How to choose reflective road studs on motorways?

The requirements for reflective road markers are different at different locations and sections of motorways. To achieve better road guidance effects and higher cost-effectiveness, we can choose to install different reflective road studs at different locations.

1. The main line of the motorway

The main line has a large volume of traffic and a high speed, so the visibility and durability of reflective road studs are required to be high. You can choose to install cast aluminum reflective road studs or glass road stud reflectors on these sections. They have high-brightness reflective sheets that can significantly enhance visibility at night and in rainy and foggy weather. The installation method can be mainly embedded to ensure that the reflective road studs are installed more firmly and have a longer service life.

2. Curved areas of motorways

The driver’s vision is often obstructed in the curved areas of motorways, which makes it easy for vehicles to deviate from the lane and cause danger. Cast aluminum road studs, or solar road studs, can be installed in this area to provide higher impact resistance and visual warning functions. High-brightness road studs are particularly suitable for areas with insufficient lighting on curved roads at night or in bad weather.

3. Motorway ramp entrances and exits

Embedded glass reflective road studs, or solar road studs, are installed to guide vehicles in and out. The road studs installed in this area can choose two-way reflective sheets, such as white + yellow or yellow + red, to indicate the direction of the entrance and exit and guide vehicles to drive from the correct lane.

4. Emergency parking strips on motorways

When installing road stud reflectors in the emergency parking strips of motorways, it is necessary to mark the parking area to ensure the safety of temporarily parked vehicles. Cast aluminum or plastic reflective road studs can be selected, and the brightness of the reflective sheet is required to be high.
reflectors on motorway

reflectors on motorway

Conclusion

Reflective road studs are installed on motorways to ensure the driving safety of high-speed vehicles. motorways are a special driving environment with heavy traffic and high speeds, which requires higher reflective road studs. Different reflective road studs can be selected at different locations on motorways to achieve better safety guidance and warning effects.
+86-13949515330
info@sz-uken.com
+86-13949515330